BPI

Location: Home » News Center » news » company news

Common Failure Analysis of Lithium ion Battery (II)

Release date:Jun 15 ,2022 Source:BPI Pageviews:-
Troubleshooting methods of lithium battery: 1. What if the battery/battery pack fails to charge?
Troubleshooting methods of lithium battery:

1. What if the battery/battery pack fails to charge?

1) Check whether the battery or battery pack is a zero-voltage battery with high internal resistance;

2) Check whether the connection of battery pack, electronic components and protection circuit is abnormal;

3) Check whether the charging equipment or charging circuit has charging voltage/current output in charging state;

4) Whether the ambient temperature is too high to cause low charging efficiency.



Methods:

1) Understand customers' specific use and conditions of batteries;

2) Take the same type of battery and multimeter (current) in series to charge the circuit, and judge whether the charging equipment is normal according to the charging current value;

3) Repeated analysis and processing of single cell's zero-voltage step;

4) Customers are advised to choose charging equipment or charging circuit with better stability and performance.



2. What if the battery/battery string fails to discharge?

Symptom: The device does not work after charging, and the open-circuit voltage of the battery pack does not change or does not change much.

1) Check whether the battery/battery pack has zero voltage and high internal resistance batteries;

2) Whether the electronic components and protection circuit inside the battery pack are damaged;

3) Check whether the discharge circuit of the equipment is normal;

4) Whether the pole lug is broken, forming a circuit break.



Methods:

1) Connect the device to a fully charged battery/battery pack of the same type to check whether the device works normally;

2) Use a multimeter to check whether the electronic components and protection circuit inside the battery are normal.

3) Repeated analysis and processing of single cell's zero-voltage step;

4) If the electrical discharge circuit is abnormal, the customer is advised to repair and replace the electrical appliances in time;

5) If the customer does not modify the battery pack by himself, special technical personnel are required for further analysis.
【Tag of this article】:
【Editor】:BPIall rights reserved:https://www.betterpower.netPlease indicate the source
Related News
Read More >>
How long does it take for a NiMH battery to be inflated for the first time? How long does it take for a NiMH battery to be inflated for the first time?
Jun 15 ,2022
Long stuck (boxed) monomer, placement: room temperature + temperature and humidity normal situation, nickel metal hydrid...
Open up new circuit with outdoor power supply Open up new circuit with outdoor power supply
Jun 15 ,2022
Recently, the 10th new generation information technology industry Standardization Forum digital power standardization su...
XIAOBEI  take you into BPI lithium battery PACK XIAOBEI take you into BPI lithium battery PACK
Jun 13 ,2022
I am Xiaobei from BPI. Today, Xiaobei will take you into the BPI battery and explore the lithium battery pack. First of ...
Fearless of power failure, outdoor power supply will bring you infinite joy Fearless of power failure, outdoor power supply will bring you infinite joy
Jun 10 ,2022
BPI will be based on customer needs, by the professional technical team to solve problems for customers, choose the most...

LEAVE A MESSAGE

Copyright © BetterPower Battery Co., Ltd. All rights reserved.Privacy StatementTerms & ConditionsSitemapCNZZ